Call settings
Press , and select
Tools
>
Settings
>
Phone
>
Call
.
●
Send my caller ID
— You can set your phone
number to be displayed to (
Yes
) or hidden from
(
No
) the person to whom you are calling, or the
value may be set by your service provider when
you make a subscription (
Set by network
)
(network service).
●
Call waiting
— If you have activated call waiting
(network service), the network notifies you of a
new incoming call while you have a call in
progress. Set the function on (
Activate
) or off
(
Cancel
), or check whether the function is
activated (
Check status
).
●
Internet call waiting
— Select
Activated
to be
notified of a new incoming internet call while
you have a call in progress.
●
Internet call alert
— Select
On
to be alerted for
incoming internet calls. If you select
Off
, you are
not alerted, but a notification about missed calls
appears.
●
Default call type
— To set internet calls as the
default call type when making calls, select
Internet call
. If an internet call service is not
available, a regular voice call is started instead.
153
Se
ttings
●
Reject call with SMS
— To send a text message
to a caller informing why you could not answer
the call, select
Yes
.
●
Message text
— Write a text to be sent in a text
message when you reject a call.
●
Image in video call
— If video is not sent during
a video call, you can select a still image to be
displayed instead.
●
Automatic redial
— Select
On
, and your device
makes a maximum of 10 attempts to connect the
call after an unsuccessful call attempt. To stop
automatic redialling, press the end key.
●
Show call duration
— Activate this setting if
you want the length of a call to be displayed
during the call.
●
Speed dial
— Select
On
, and the numbers
assigned to the number keys (2 to 9) can be
dialled by pressing and holding the key.
See
"Speed dial a phone number", p. 122.
●
Anykey answer
— Select
On
, and you can
answer an incoming call by briefly pressing any
keypad key, except the left and right selection
keys, the power key, and the end key.
●
Line in use
— This setting (network service) is
shown only if the SIM card supports two
subscriber numbers, that is, two phone lines.
Select which phone line you want to use for
making calls and sending text messages. Calls on
both lines can be answered irrespective of the
selected line. If you select
Line 2
and have not
subscribed to this network service, you are not
able to make calls. When line 2 is selected, is
shown in the standby mode.
Tip: To switch between the phone lines,
press and hold # in the standby mode.
●
Line change
— To prevent line selection
(network service), select
Disable
if supported by
your SIM card. To change this setting, you need
the PIN2 code.